Home
last modified time | relevance | path

Searched hist:1488 (Results 1 – 25 of 26) sorted by relevance

12

/unit/src/
H A Dnxt_signal_handlers.c1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_cert.hdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_process_type.hdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_clone.hdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_main_process.hdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_java.cdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_cert.cdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_external.cdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_runtime.hdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_process.hdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_port_memory.cdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_application.hdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_process.cdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_port.hdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_port.cdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_application.cdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_controller.cdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_runtime.cdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_php_sapi.cdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_main_process.cdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
H A Dnxt_unit.cdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
/unit/test/
H A Dtest_java_application.pydiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
/unit/src/perl/
H A Dnxt_perl_psgi.cdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
/unit/src/ruby/
H A Dnxt_ruby.cdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.
/unit/auto/
H A Dsourcesdiff 1488:6976d36be926 Mon Mar 09 16:28:00 UTC 2020 Tiago Natel de Moura <t.nateldemoura@f5.com> Refactor of process management.

The process abstraction has changed to:

setup(task, process)
start(task, process_data)
prefork(task, process, mp)

The prefork() occurs in the main process right before fork.

The file src/nxt_main_process.c is completely free of process
specific logic.

The creation of a process now supports a PROCESS_CREATED state. The
The setup() function of each process can set its state to either
created or ready. If created, a MSG_PROCESS_CREATED is sent to main
process, where external setup can be done (required for rootfs under
container).

The core processes (discovery, controller and router) doesn't need
external setup, then they all proceeds to their start() function
straight away.

In the case of applications, the load of the module happens at the
process setup() time and The module's init() function has changed
to be the start() of the process.

The module API has changed to:

setup(task, process, conf)
start(task, data)

As a direct benefit of the PROCESS_CREATED message, the clone(2) of
processes using pid namespaces now doesn't need to create a pipe
to make the child block until parent setup uid/gid mappings nor it
needs to receive the child pid.

12